The High Shear Mixing Granulator stirs powder and binder through the action of the mixing blade. Simultaneously, all materials take on the shape of a liquid bridge under the continuous effects of the conical wall. Through extrusion, friction, and crumbling by the blade and the conical tank wall, wet granules are formed.
Wet granulation is a process that involves combining different particles of powder together using liquid solutions and adhesives. In the wet granulation process, you will need a non- toxic and volatile granulating fluid to mass the powder particles. Binding of the particles often occur through a boost action from an impeller and leads to an enlargement of particles. Note that granulation does not depend on any compressive forces in the formation of granules.
The wet mill device attch under the discharge port of wet mixing granulator, wet mill suitable for lump breaking and sizing wet granules is provided to size the material prior to transfer to the fluid bed dryer.The feeding interface is equipped with an inflatable seal including safety interlock in order to provide optimum docking condition with the mixer granulator. The inflatable seal also facilitate access for replacement of the mill.
According to your production requirement choose the right solution.